logo

Home products liionbms controllers 2HR0xxxE

2HR0xxxE series HV Front Ends

Lithiumate™ remote High Voltage Front End, enclosed

Enclosed HV Front End
Enclosed HV Front End. Click to enlarge.
back to topDescription

This optional, Remote High Voltage Front End, may be used with a BMS controller, to add certain testing before turning on contactors:

  • Absence of current leakage between battery and chassis
  • Presence of battery voltage
  • Contactors are operational
  • End of precharge inrush current pulse

May include battery current sensors:

  • None, ±5 or ±20 A for the source current
  • None, ±50, ±100 or ±200 A for the load current

Includes drivers for contactors, including a precharge relay.

A separate HV Front End:

  • Keeps the high voltage away from the BMS controller
  • Keeps any electrical noise away from the BMS controller
  • May simplify the layout of high voltage cabling

This Remote HV Front End communicates with the BMS controller through the CAN bus.

back to topSpecifications

General specifications:
Symbol Item Conditions Min Nom Max Units
Vbatt Battery voltage Precharge and leak tests in use 18   750 Vdc
Precharge and leak tests not used 3.2 1100
Visol Isolation voltage Battery to chassis 2.5 kVac
Vsupply Supply voltage Rev C 10 12 15 Vdc
Isupply Supply current No sensors 20 150 mAdc
Two current sensors 44 170
Ibatt Source current
linear range
2HR0005B, 2HR0055B, 2HR0105B, 2HR0205B -5   5 A
2HR0020B, 2HR0070B, 2HR0120B, 2HR0220B -20 20
Load current
linear range
2HR0050B, 2HR0055B, 2HR0070B -50 50
2HR0100B, 2HR0105B, 2HR0120B -100 100
2HR0200B, 2HR0205B, 2HR0220B -200 200
Current sensor tolerance 1 %
Iopen-drain-cont Open Drain output current, continuous On 1.5 A
Iopen-drain-peak Open Drain output current, inrush On, 100 ms 5 A
Vopen-drain Open Drain output voltage Off 30 V
IHV-leak-on HV isolation test current Isolation test in progress 2.7 5.0 mA

For detailed specifications, please see the Lithiumate™ Manual.

back to topOrdering

Prices listed below: when ordered as part of a system.
PN Source current sensor Load current sensor Price
2HR0000E - - $ 166
2HR0005E ±5 A - $ 176
2HR0020E ±20 A -
2HR0050E - ±50 A
2HR0100E - ±100 A
2HR0200E - ±200 A
2HR0055E ±5 A ±50 A $ 186
2HR0070E ±20 A ±50 A
2HR0105E ±5 A ±100 A
2HR0120E ±20 A ±100 A
2HR0205E ±5 A ±200 A
2HR0220E ±20 A ±200 A

To order, please get a quote.

e-logo

© 2010 Elithion™, LLC. All rights reserved, except where noted by CC mark. Handcrafted on 8/11/10 by Davide, graphic design by morninglori
The Elithion brand and the 'ə' (upside down 'e') logo are Trademarks of Elithion LLC.
Policies Contact us
 

In this page: